Where can I get the SSC JE Syllabus 2023 PDF Free Download?

Here you can get the SSC JE Syllabus 2023 PDF Free Download and utilize the syllabus pdf for the upcoming exams.

Is there any negative marking in SSC JE Paper 1 Exam Pattern 2023?

Yes, a 0.25 negative mark is applicable for every wrong answer.

What is the nature of SSC JE Paper 2 Exam Pattern 2023?

The nature of the SSC JE Paper 2 Exam Pattern 2023 is completely descriptive paper (Pen and paper mode).

SSC JE Syllabus 2026: Paper 1 & 2 Syllabus for Civil, Electrical, Mechanical

Oct 06 2026

Download More PDF's Here

The SSC JE Syllabus 2026 lists the subjects and topics candidates need to prepare for the Junior Engineer examination conducted by the Staff Selection Commission. The exam has two papers. Paper 1 covers General Intelligence and Reasoning, General Awareness and General Engineering, while Paper 2 is a fully technical paper based on the discipline chosen by the candidate.

The SSC JE 2026 notification was released on 2 September 2026 for 1,748 tentative vacancies. It brings two important changes: Paper 1 is now qualifying in nature, and the final merit is prepared on Paper 2 marks only. The notification also adds new posts of JE (Telecom) and Scientific Assistant in IMD. This article covers the detailed syllabus for Civil, Electrical and Mechanical Engineering along with the updated exam pattern.

SSC JE Syllabus 2026 and Exam Pattern

The SSC JE syllabus 2026 combines common sections with discipline-specific engineering subjects. Go through the full syllabus before you start preparing so you can divide your time between the common and technical subjects.

Particulars	Details
Conducting Body	Staff Selection Commission (SSC)
Exam Name	Junior Engineer (Civil, Electrical, Mechanical and Telecom) and Scientific Assistant Examination, 2026
Post Category	Group B (Non-Gazetted)
Vacancies	1,748 (tentative)
Selection Process	Paper 1 (qualifying) and Paper 2 (merit), followed by document verification
Paper 1 Subjects	General Intelligence & Reasoning, General Awareness, General Engineering
Paper 2 Subject	General Engineering (discipline-specific)
Paper 1	200 questions, 200 marks, 2 hours, 0.25 negative marking
Paper 2	100 questions, 300 marks, 2 hours, 1 mark negative marking
Paper 1 Exam Date	2 to 6 November 2026
Paper 2 Exam Date	December 2026 (tentative)

SSC JE Syllabus 2026 PDF Download

The official SSC JE syllabus 2026 is published in the SSC JE 2026 notification PDF, available on the official website, ssc.gov.in. The syllabus for each engineering discipline is listed in the notification as a separate part, so download it and keep only your discipline's technical syllabus handy. You can use the PDF to plan a study timetable, make topic-wise notes and tick off completed topics as you go.

Steps to download the SSC JE Syllabus 2026 PDF:

Visit the official website, ssc.gov.in.
Go to the Notice Board or the Junior Engineer examination section.
Open the notification for the Junior Engineer Examination, 2026.
Scroll to the scheme of examination and syllabus annexure and download the PDF.

SSC JE Paper 1 Syllabus 2026

The SSC JE Paper 1 syllabus has three sections: General Intelligence and Reasoning, General Awareness and General Engineering. The first two sections are common to all candidates, while the engineering section depends on the discipline selected in the application form. Paper 1 has 200 questions for 200 marks, with 100 questions from General Engineering. Since Paper 1 is now qualifying, you only need to score the prescribed minimum marks to move on to Paper 2. Your Paper 1 score is not added to the final merit.

SSC JE General Intelligence and Reasoning Syllabus

This section tests your ability to spot patterns, understand relationships and think logically. It includes both verbal and non-verbal reasoning. Speed matters here, so practise different question types regularly.

Topic Area	Topics
Analogy	Verbal analogy, figure analogy, semantic analogy
Classification	Verbal classification, figure classification
Series	Number series, arithmetical series, non-verbal series
Relationship Concepts	Blood relations and relationship-based problems
Logical Reasoning	Similarities, differences, observation and logical relationships
Analytical Ability	Analysis, judgement, decision-making and problem solving
Visual Reasoning	Space visualisation, visual memory and discrimination
Arithmetic Reasoning	Arithmetical reasoning and arithmetical computation
Abstract Reasoning	Abstract ideas, symbols and their relationships

SSC JE General Awareness Syllabus

The General Awareness section checks your knowledge of current events and everyday matters, including their scientific side, along with questions on India and its neighbouring countries. Split your preparation between static subjects and recent developments.

Topic Area	Topics
Current Affairs	National and international events, recent developments
History	Ancient, Medieval and Modern Indian History
Culture	Indian art, culture, traditions and heritage
Geography	Physical, social and economic geography of India and the world
Polity	Constitution, governance and political system
Economy	Indian economy and economic scene
General Science	Everyday science and scientific research
Static GK (commonly asked)	Awards and honours, books and authors, sports, important days

SSC JE General Engineering Syllabus

General Engineering is the technical section of Paper 1. You attempt only the part that matches the discipline you selected in the application form. The stream you can choose depends on your diploma or degree, so check who is eligible for SSC JE before you finalise your post preference.

Engineering Stream	Major SSC JE Syllabus Topics
Civil & Structural	Building Materials; Estimating, Costing and Valuation; Surveying; Soil Mechanics; Hydraulics; Irrigation Engineering; Transportation Engineering; Environmental Engineering; Structural Engineering (Theory of Structures, Concrete Technology, RCC Design, Steel Design)
Electrical	Basic Concepts; Circuit Law; Magnetic Circuit; AC Fundamentals; Measurement and Measuring Instruments; Electrical Machines; Fractional Kilowatt Motors; Synchronous Machines; Generation, Transmission and Distribution; Estimation and Costing; Utilization of Electrical Energy; Basic Electronics
Mechanical	Theory of Machines and Machine Design; Engineering Mechanics and Strength of Materials; Thermal Engineering; Fluid Mechanics and Machinery; Production Engineering

SSC JE Civil Engineering Syllabus 2026

The SSC JE Civil Engineering syllabus covers the core areas of civil engineering. Candidates in the Civil & Structural stream should study both concepts and numerical applications, as the syllabus includes subjects such as surveying, soil mechanics, hydraulics and structural engineering. Topic-wise preparation makes this large syllabus easier to finish.

SSC JE Civil Engineering Syllabus: Building Materials

Building Materials covers the physical and chemical properties, classification, standard tests, uses and manufacture of construction materials.

Topic Area	Topics
Stones	Building stones: types, properties, quarrying, classification and uses
Bricks and Silicate Materials	Manufacturing, classification, properties and tests
Cement	Portland cement: types, ingredients, properties, tests and uses
Timber	Timber and wood-based products, laminates, defects and preservation
Bituminous Materials	Properties, types and applications
Other Materials	Asbestos products, paints and varnishes

SSC JE Civil Engineering Syllabus: Estimating, Costing and Valuation

This section deals with estimating quantities, analysing rates and valuing civil works. You should know how quantities and costs are worked out for different construction activities.

Topic Area	Topics
Estimation	Types of estimates and methods of measurement
Quantity Calculation	Buildings, earthwork, brickwork, RCC work, plastering, flooring, roads and culverts
Rate Analysis	Rate analysis of different items of work
Specifications	General and detailed specifications
Valuation	Principles and methods of valuation, depreciation

SSC JE Civil Engineering Syllabus: Surveying

Surveying deals with measuring land and physical features. Questions cover conventional survey methods along with instruments and calculations for distances, levels and directions.

Topic Area	Topics
Chain Surveying	Principles of surveying, measurement of distance, chain surveying
Compass Surveying	Prismatic compass, compass traversing, bearings, local attraction
Plane Table	Plane table surveying methods
Theodolite	Theodolite traversing and adjustments
Levelling	Levelling terms, curvature and refraction corrections, adjustments of dumpy level
Contouring	Methods of contouring and uses of contour maps
Other Topics	Tacheometric survey, curve setting, earthwork calculation, advanced surveying equipment

SSC JE Civil Engineering Syllabus: Soil Mechanics

Soil Mechanics focuses on the engineering properties and behaviour of soil. You should understand soil classification, permeability, consolidation, shear strength and bearing capacity and how they apply to foundation work.

Topic Area	Topics
Soil Properties	Origin of soil, phase diagram, void ratio, porosity, water content, unit weights
Index Properties and Classification	Grain size distribution, Atterberg's limits, IS soil classification, plasticity chart
Permeability	Coefficient of permeability, aquifers, effective stress, quick sand
Consolidation	Principles of consolidation, pre-consolidation pressure, e-log p curve, settlement
Shear Strength	Direct shear test, vane shear test, triaxial test
Compaction	Laboratory compaction test, maximum dry density, optimum moisture content
Earth Pressure	Earth pressure theories, active and passive earth pressure
Bearing Capacity	Bearing capacity of soils, plate load test, standard penetration test

SSC JE Civil Engineering Syllabus: Hydraulics

Hydraulics covers fluid behaviour and flow and how they apply in civil engineering. Focus on fluid properties, pressure, flow measurement and flow through pipes and open channels.

Topic Area	Topics
Fluid Properties	Density, viscosity, surface tension and pressure
Hydrostatics	Pressure measurement and forces on surfaces
Bernoulli's Theorem	Bernoulli's theorem and its applications
Flow Measurement	Measurement of flow
Flow Through Pipes	Pipe flow and head losses
Open Channel Flow	Flow in open channels, weirs, flumes and spillways
Hydraulic Machines	Pumps and turbines

SSC JE Civil Engineering Syllabus: Irrigation Engineering

Irrigation Engineering deals with planning and managing water for agriculture. The syllabus covers irrigation methods, hydrology, canals, weirs and flood control.

Topic Area	Topics
Irrigation	Definition, necessity, benefits, ill effects, types and methods of irrigation
Hydrology	Measurement of rainfall, run-off coefficient, rain gauge, evaporation and infiltration losses
Water Requirement of Crops	Duty, delta, base period, Kharif and Rabi crops, command area, irrigation efficiencies
Canals and Wells	Types of canals, canal losses, canal lining, shallow and deep wells, yield from a well
Weirs and Barrages	Weirs, barrages, failure of weirs, silt and scour, Kennedy's and Lacey's theories
Flood Control and Waterlogging	Causes and control of floods, waterlogging and preventive measures, land reclamation

SSC JE Civil Engineering Syllabus: Transportation Engineering

Transportation Engineering covers highway, railway and traffic engineering. Pavement design and track components are the key areas.

Topic Area	Topics
Highway Engineering	Cross-sectional elements, geometric design, types of pavements
Pavement Materials	Aggregates and bitumen, tests on pavement materials
Pavement Design and Construction	Flexible and rigid pavements, WBM, WMM, gravel roads, bituminous construction, pavement maintenance, highway drainage
Railway Engineering	Permanent way components (sleepers, ballast, fixtures and fastenings), track geometry, points and crossings, stations and yards
Traffic Engineering	Traffic surveys, speed-flow-density relationships, intersections, traffic signals, signs and markings, road safety

SSC JE Civil Engineering Syllabus: Environmental Engineering

Environmental Engineering covers water supply, sewage treatment, solid waste and pollution control. Understand the basic processes used to treat water and sewage.

Topic Area	Topics
Water Supply	Quality of water, sources of water supply, purification and distribution of water
Sanitation and Sewerage	Need for sanitation, sewerage systems, circular and oval sewers, sewer appurtenances
Sewage Treatment	Sewage treatment processes, surface water drainage
Solid Waste Management	Types, effects and engineered management systems
Air Pollution	Pollutants, causes, effects and control
Noise Pollution	Causes, health effects and control

SSC JE Civil Engineering Syllabus: Structural Engineering

Structural Engineering is split into four areas: Theory of Structures, Concrete Technology, RCC Design and Steel Design. RCC design questions can be based on both the Limit State and Working Stress methods.

Topic Area	Topics
Theory of Structures	Elastic constants, determinate and indeterminate beams, SFD and BMD, moment of inertia, slope and deflection, columns, torsion of circular sections
Concrete Technology	Properties of concrete, water-cement ratio, workability, mix design, batching, compaction, curing, quality control, hot and cold weather concreting
RCC Design	Singly and doubly reinforced beams, T-beams, lintels, one-way and two-way slabs, isolated footings, columns, staircases, retaining walls, water tanks
Steel Design	Design and construction of steel columns, beams, roof trusses and plate girders

SSC JE Electrical Engineering Syllabus 2026

The SSC JE Electrical Engineering syllabus covers electrical fundamentals, circuits, machines, measurements, power systems, estimation and electronics. Build a strong base in the basic concepts first and then move on to machines and power systems. Regular numerical practice will improve both speed and accuracy.

Basic Electrical Engineering

This section covers the basic concepts you need to understand electrical systems.

Topic Area	Topics
Circuit Parameters	Concepts of resistance, inductance and capacitance, and the factors affecting them
Electrical Quantities	Concepts of current, voltage, power and energy and their units

Circuit Law

Circuit Law covers the laws and methods used to analyse electrical circuits. Practise both conceptual and numerical questions.

Topic Area	Topics
Kirchhoff's Laws	KCL and KVL
Network Theorems	Simple circuit solutions using network theorems (Thevenin's, Norton's, Superposition)

Magnetic Circuit

Magnetic Circuit covers magnetic quantities, magnetic materials and electromagnetic induction.

Topic Area	Topics
Magnetic Quantities	Flux, MMF and reluctance
Magnetic Materials	Different kinds of magnetic materials
Magnetic Calculations	Calculations for straight, circular and solenoidal conductors
Electromagnetic Induction	Electromagnetic induction, self and mutual induction

AC Fundamentals

AC Fundamentals deals with alternating quantities, AC circuits and polyphase systems. Numerical practice is especially useful in this section.

Topic Area	Topics
AC Quantities	Instantaneous, peak, RMS and average values; representation of sinusoidal waveforms
AC Circuits	Series and parallel AC circuits with R, L and C
Resonance	Resonance and tank circuits
Polyphase Systems	Star and delta connections, three-phase power
Transient Response	DC and sinusoidal response of R-L and R-C circuits

Electrical Measurements and Instruments

This section focuses on measuring instruments and the principles behind how they work.

Topic Area	Topics
Power and Energy Measurement	Single-phase and three-phase power (active and reactive), two-wattmeter method, energy meters
Measuring Instruments	Moving coil and moving iron ammeters and voltmeters, extension of range, wattmeters, multimeters, megger
Other Measurements	Frequency and phase angle measurement, AC bridges
Instruments and Transformers	Use of CRO, signal generator, CT and PT
Fault Detection	Earth fault detection

Electrical Machines

Electrical Machines covers DC machines, transformers, induction motors and synchronous machines. Study their construction, working principles, characteristics and applications.

Topic Area	Topics
DC Machines	Construction, principles of DC motors and generators, characteristics, speed control, starting, braking, losses and efficiency
Transformers	Single-phase and three-phase transformers, equivalent circuit, voltage regulation, OC and SC tests, losses, efficiency, parallel operation, auto-transformers
Three-Phase Induction Motors	Rotating magnetic field, equivalent circuit, torque-speed characteristics, starting, speed control and braking
Fractional Kilowatt Motors	Fractional kilowatt motors and single-phase induction motors: characteristics and applications
Synchronous Machines	Generation of three-phase EMF, armature reaction, voltage regulation, parallel operation of alternators, synchronising, starting and applications of synchronous motors

Generation, Transmission and Distribution

This section covers the electrical power system from generation to distribution, along with protection.

Topic Area	Topics
Power Generation	Types of power stations, load factor, diversity factor, demand factor, cost of generation, interconnection
Power Factor and Tariffs	Power factor improvement, types of tariffs
Faults	Types of faults, short circuit current for symmetrical faults
Switchgear and Protection	Circuit breaker rating, arc extinction, HRC fuses, Buchholz relay, Merz-Price protection, protection of feeders and bus bars, lightning arresters
Transmission and Distribution	Transmission and distribution systems, conductor materials, efficiency of systems
Cables	Types of cables, cable rating and derating factors

Estimation and Costing

This section tests practical knowledge of electrical installation work and the related rules.

Topic Area	Topics
Lighting Schemes	Estimation of lighting schemes
Installations	Electrical installation of machines and relevant IE Rules
Earthing	Earthing practices and IE Rules

Utilization of Electrical Energy

This section covers the practical uses of electrical energy in industry and daily life.

Topic Area	Topics
Illumination	Lighting principles and illumination
Heating and Welding	Electric heating and electric welding
Electroplating	Principles of electroplating
Electric Drives	Electric drives and motors

Basic Electronics

Basic Electronics covers common semiconductor devices and simple circuits built with them.

Topic Area	Topics
Diodes	Working of PN junction diodes
Transistors	NPN and PNP transistors, BJT and JFET
Simple Circuits	Simple circuits using these devices

SSC JE Mechanical Engineering Syllabus 2026

The SSC JE Mechanical Engineering syllabus includes mechanics, theory of machines, thermal engineering, fluid mechanics and production engineering. Combine concept study with numerical practice, as many topics require formula-based problem solving.

Theory of Machines and Machine Design

This section covers mechanisms, power transmission and the working of common machine elements.

Topic Area	Topics
Mechanisms	Concept of simple machine, four-bar linkage and link motion
Flywheels	Flywheels and fluctuation of energy
Power Transmission	Power transmission by belts (V-belts and flat belts), clutches (plate and conical)
Gears	Types of gears, gear profile and gear ratio calculation
Governors	Principles and classification
Machine Elements	Riveted joints, cams, bearings, friction in collars and pivots

Engineering Mechanics and Strength of Materials

This section combines basic mechanics with how materials behave under different types of loading.

Topic Area	Topics
Engineering Mechanics	Equilibrium of forces, laws of motion, displacement, velocity and acceleration, friction, moment of inertia
Stress and Strain	Stress and strain, Hooke's law, elastic constants (Young's modulus, shear modulus, bulk modulus, Poisson's ratio)
Beams	Shear force and bending moment diagrams, bending stress and deflection
Torsion	Torsion of circular shafts
Pressure Vessels	Thin-walled pressure vessels
Columns	Euler's theory

Thermal Engineering

Thermal Engineering covers thermodynamics, IC engines, steam, boilers, compressors and refrigeration.

Topic Area	Topics
Properties of Pure Substances	p-v and p-T diagrams, steam tables, dryness fraction, degree of superheat, Mollier chart
Thermodynamics	First and second laws of thermodynamics
IC Engines	Air standard cycles (Otto, Diesel), IC engine performance, combustion, cooling and lubrication
Steam and Boilers	Rankine cycle; boilers: classification, specification, fittings and accessories
Air Compressors	Air compressors and their cycles
Refrigeration	Refrigeration cycles, principle of a refrigeration plant
Nozzles and Turbines	Nozzles and steam turbines

Fluid Mechanics

Fluid Mechanics and Machinery deals with fluid properties, fluid flow and hydraulic machines.

Topic Area	Topics
Fluid Properties	Properties and classification of fluids
Fluid Statics	Fluid statics and measurement of fluid pressure
Fluid Kinematics and Dynamics	Fluid kinematics, dynamics of ideal fluids
Flow Measurement	Measurement of flow rate
Hydraulic Machines	Hydraulic turbines and centrifugal pumps

Production Engineering

Production Engineering covers engineering materials, manufacturing processes and machine tools.

Topic Area	Topics
Steels and Heat Treatment	Classification of steels (mild steel and alloy steel), heat treatment of steel
Welding	Arc, gas and resistance welding, TIG and MIG, brazing and soldering, welding defects and testing, NDT
Foundry and Casting	Casting methods, defects and different casting processes
Metal Forming	Forging and extrusion
Metal Cutting	Metal cutting principles and cutting tools
Machining	Basic principles of machining with lathe, milling, drilling, shaping and grinding; machine tools and manufacturing processes

SSC JE Paper 2 Syllabus 2026

The SSC JE Paper 2 syllabus is entirely General Engineering from the discipline selected by the candidate. Civil candidates attempt Civil & Structural Engineering, Electrical candidates attempt Electrical Engineering and Mechanical candidates attempt Mechanical Engineering. Paper 2 has 100 objective questions carrying 300 marks, and from 2026 the final merit is based on Paper 2 alone, so this paper deserves most of your preparation time.

Stream	Paper 2 Syllabus
Civil & Structural	Building Materials; Estimating, Costing and Valuation; Surveying; Soil Mechanics; Hydraulics; Irrigation Engineering; Transportation Engineering; Environmental Engineering; Theory of Structures; Concrete Technology; RCC Design; Steel Design
Electrical	Basic Concepts; Circuit Law; Magnetic Circuit; AC Fundamentals; Measurement and Measuring Instruments; Electrical Machines; Fractional Kilowatt Motors; Synchronous Machines; Generation, Transmission and Distribution; Estimation and Costing; Utilization of Electrical Energy; Basic Electronics
Mechanical	Theory of Machines and Machine Design; Engineering Mechanics and Strength of Materials; Thermal Engineering; Fluid Mechanics and Machinery; Production Engineering

The new JE (Telecom) and Scientific Assistant (IMD) posts have their own technical syllabus covering subjects such as Electronics & Telecommunication, Computer Science and Physics. Because Scientific Assistant accepts B.Sc. (Physics) graduates, many science students are now asking whether a B.Sc. student can apply for SSC JE. Check the official notification for the detailed syllabus of these new streams.

SSC JE Exam Pattern 2026

Study the SSC JE syllabus and exam pattern together, because the marks and question distribution decide how you should split your preparation time. Both papers are objective-type computer-based tests. Paper 1 is a qualifying screening test, while Paper 2 is fully technical and decides the final merit.

SSC JE Paper 1 Exam Pattern

Paper 1 tests General Intelligence and Reasoning, General Awareness and General Engineering. The engineering section has the most questions, so technical preparation matters even at this stage. Paper 1 is qualifying, so you must score the minimum qualifying marks to be shortlisted for Paper 2.

Particular	Details
Duration	2 Hours
Mode	Computer-Based Test (objective, multiple-choice)
Total Questions	200
Total Marks	200
Negative Marking	0.25 marks for each wrong answer
Nature	Qualifying (marks not counted in final merit)

Section	Questions	Marks
General Intelligence & Reasoning	50	50
General Awareness	50	50
General Engineering (Civil / Electrical / Mechanical)	100	100
Total	200	200

SSC JE Paper 2 Exam Pattern

Paper 2 is a technical paper based on the engineering discipline selected by the candidate. It has 100 questions of 3 marks each for a total of 300 marks. Attempt only the part that matches the discipline you chose in your application form.

Particular	Details
Duration	2 Hours
Mode	Computer-Based Test (objective, multiple-choice)
Total Questions	100
Total Marks	300 (3 marks per question)
Negative Marking	1 mark for each wrong answer
Subject	General Engineering (discipline-specific)
Nature	Final merit is based on Paper 2 marks

SSC JE Syllabus 2026: Subject-Wise Weightage

The subject-wise weightage is clear from the questions and marks given to each section. In Paper 1, General Engineering carries half the paper, while Reasoning and General Awareness carry a quarter each. Paper 2 is fully technical, and since it alone decides your final rank, technical subjects carry the most weight in your overall preparation.

Paper	Subject	Questions	Marks	Weightage
Paper 1	General Intelligence & Reasoning	50	50	25%
Paper 1	General Awareness	50	50	25%
Paper 1	General Engineering	100	100	50%
Paper 1 Total	Qualifying	200	200	100%
Paper 2	General Engineering	100	300	100% (decides merit)

How to Prepare for SSC JE Syllabus 2026?

A good SSC JE preparation strategy balances technical subjects with Reasoning and General Awareness. The technical syllabus is large, so do not try to finish everything at once. A subject-wise plan, regular numerical practice and repeated revision make it manageable.

Understand the Complete Syllabus: Download the SSC JE syllabus and sort topics into strong, moderate and weak areas. This tells you where to spend more time.
Give Priority to Technical Subjects: General Engineering is half of Paper 1, and Paper 2, which decides your rank, is completely technical. Build strong concepts in your discipline.
Do Not Ignore Paper 1 Sections: Paper 1 is qualifying, but you still need to clear it. Practise Reasoning and General Awareness regularly so they don't hold you back.
Practise Numerical Questions: Don't limit yourself to theory. Solve numericals regularly from subjects such as Strength of Materials, Soil Mechanics, Electrical Circuits, Thermodynamics and Fluid Mechanics.
Use Previous Year Questions: Solve SSC JE previous year questions after finishing each topic. They show how concepts are tested and which areas need more work.
Take Regular Mock Tests: Once a good part of the syllabus is done, attempt full-length mocks under timed conditions. Review wrong answers and revise the topics where you keep losing marks.

The effort is worth it: Junior Engineer posts are placed in Pay Level 6 of the 7th CPC. Read about the SSC JE salary 2026 to know the in-hand pay and allowances.

Best Books for SSC JE Preparation

Pick books that explain concepts clearly and give enough practice. Avoid collecting too many books for the same subject. Choose one reliable book per subject and add previous year papers, practice questions and mock tests.

Subject/Area	Recommended Books/Resources
General Intelligence & Reasoning	A Modern Approach to Verbal & Non-Verbal Reasoning – R.S. Aggarwal
General Awareness	Lucent's General Knowledge
Civil Engineering	Civil Engineering: Through Objective Type Questions – S.P. Gupta & S.S. Gupta
Electrical Engineering	Objective Electrical Technology – V.K. Mehta & Rohit Mehta
Mechanical Engineering	Mechanical Engineering (Conventional and Objective Types) – R.S. Khurmi & J.K. Gupta
Previous Year Questions	SSC JE previous year solved papers and topic-wise PYQ books
Practice	SSC JE mock tests and discipline-specific question banks

SSC JE Syllabus 2026 FAQs

Q1. What is the SSC JE Syllabus 2026?

The SSC JE Syllabus 2026 covers General Intelligence and Reasoning, General Awareness and General Engineering in Paper 1. Paper 2 is entirely General Engineering, based on the discipline chosen: Civil and Structural, Electrical or Mechanical Engineering.

Q2. Is the SSC JE Syllabus 2026 different for Civil, Electrical and Mechanical Engineering?

Yes. The Reasoning and General Awareness sections are common, but the technical syllabus is different for each discipline. Each candidate prepares only the engineering part of their own discipline.

Q3. Where can I download the SSC JE Syllabus PDF?

The SSC JE Syllabus PDF is part of the SSC JE 2026 notification, available on the official website, ssc.gov.in. It lists the scheme of examination and the detailed topics for each discipline.

Q4. What is the SSC JE Paper 1 syllabus?

The SSC JE Paper 1 syllabus consists of General Intelligence and Reasoning (50 marks), General Awareness (50 marks) and General Engineering (100 marks) based on the discipline selected by the candidate.

Q5. What is the SSC JE Paper 2 syllabus?

The SSC JE Paper 2 syllabus is entirely General Engineering. Candidates attempt the technical part of their selected discipline: Civil and Structural, Electrical or Mechanical Engineering.

Q6. What are the subjects included in the SSC JE Paper 1 syllabus?

Paper 1 has three subjects: General Intelligence and Reasoning, General Awareness and General Engineering. The General Engineering section depends on the candidate's selected engineering stream.

Q7. What is the SSC JE Civil Engineering syllabus?

The SSC JE Civil Engineering syllabus includes Building Materials; Estimating, Costing and Valuation; Surveying; Soil Mechanics; Hydraulics; Irrigation Engineering; Transportation Engineering; Environmental Engineering; and Structural Engineering (Theory of Structures, Concrete Technology, RCC Design and Steel Design).

Q8. What is the SSC JE Electrical Engineering syllabus?

The SSC JE Electrical Engineering syllabus includes Basic Concepts, Circuit Law, Magnetic Circuit, AC Fundamentals, Measurement and Measuring Instruments, Electrical Machines, Fractional Kilowatt Motors, Synchronous Machines, Generation, Transmission and Distribution, Estimation and Costing, Utilization of Electrical Energy and Basic Electronics.

Q9. What is the SSC JE Mechanical Engineering syllabus?

The SSC JE Mechanical Engineering syllabus covers Theory of Machines and Machine Design, Engineering Mechanics and Strength of Materials, Thermal Engineering, Fluid Mechanics and Machinery, and Production Engineering.

Q10. Is General Engineering included in the SSC JE syllabus?

Yes. General Engineering is part of both papers. In Paper 1 it has 100 questions for 100 marks, and Paper 2 has 100 technical questions carrying 300 marks.

Q11. What is the SSC JE exam pattern for Paper 1 and Paper 2?

Paper 1 has 200 questions for 200 marks with 0.25 negative marking and is qualifying in nature from 2026. Paper 2 has 100 questions for 300 marks with 1 mark negative marking, and the final merit is based on Paper 2 marks. Each paper is 2 hours long.

Q12. How should I prepare for the SSC JE Syllabus 2026?

Start by understanding the full syllabus for your discipline. Give priority to technical subjects, as Paper 2 decides the final merit, while practising enough Reasoning and General Awareness to clear Paper 1. Solve previous year papers, take regular mock tests and revise weak topics.